|
|
|
|
|
|
3-Watt Cell Phone Amplifiers Boosters
BST800 Series Made for CDMA phones and networks:
ACS, Aliant Telcomm, Alltel, Bell Mobility, Blue Grass Cellular, Carolina West, Cellcom, CellularOne/western Wireless, Cellular South, First Cellular, Five Star, Inland Cellular, MTS, Pioneer, Rural Cell, Sasktel, Telus, Three Rivers, Thumb Cellular, US Cellular, Verizon
|
|
| |
|
|
The
most powerful cellular 3 watt bi-directional cell phone signal booster
amplifiers available for mobile or stationary environments. The
BST800 cell phone kit will amplify receive and transmit signals.
These boosters increase the operational distance between the cellular
telephone and the cellular base station and extend cell phone signal
range by up to 60 miles.
 
No In-Car Kit Required
No Professional Installation Required
Can Be Used In The Car, Home, Office Or Cottage
Compatible With Dual Band and Tri-Mode Cellular Telephones, PDA's and Wireless Aircards
|
The
BST800-series cell phone booster is specifically designed to
be used with CDMA EVDO digital tri-mode phones. This radio frequency
amplifier is designed and rated to amplify CDMA IS95, CDMA 2000
EVDO, WCDMA and AMPS analog signals in both transmit and recive
signal frequencies. BST 800 series cell phone boosters have
the highest measured output power, the most sensitive receivers
and the best CDMA EVDO signal quality specifications of any
booster/amplifier on the market. |
|
Professional
installation is not required when used in hand-held mode as
shown above. A variety of external
antennas are available.
Note:
best transmit signal range and receive signal will be achieved
when used with an external magnetic or thru-hole dual band
cell phone antenna. Genuine Smooth Talker cellular antennas
will produce the best results and increase cellular range
the farthest. |
|
An
antenna
adapter cable to connect to various phones must be ordered
separately and optional AC/DC power supply for use in home
or office is available.The cell phone booster can be used
with cellular wireless phones in hand-held mode as seen in
the picture above, it can be used with PDA's and wireless
aircards or it can be ordered with an installation-ready power
cord and added to a cellular hands-free in car kit.
|
|
Size: 8.75 X 3.125 X .875 inches
Weight: 19 ounces
Note:The
RF connectors on the booster are proprietary (MCT)and an adapter
is required to use this booster with an after-market antenna.
A genuine SmoothTalker antenna is recommended with this device
for best performance and range. |
To learn more about how boosters, amplifiers, repeaters and wireless cellular base stations, how digital and analog networks operate, and how to improve range of cellular phones, pda's and aircards the following articles are recommended reading:
How
cellular works and how to improve range
Differences
Between Boosters (Wired Amplifiers) and Repeaters (Wireless Amplifiers)
Single
Band vs. Dual Band Boosters
|
|
|
|
|
|
3-Watt Cell Phone Booster
BST850 Series for GSM and TDMA Phones and Networks:
Carolina West Wireless, CellularOne/Dobson, Cingular/AT&T, Highland Cellular, Panhandle, Plateau Cellular, Rogers, UniCell, Union Cellular, West Central Wireless, XIT Cellular
|
|
| |
|
|
BST850
GSM cell phone boosters are designed to amplify both GSM and TDMA
signals in order to be compatible with existing TDMA networks and
cell phones that are making the transition to GSM digital. BST850
amplifiers are designed to receive high input power of GSM phones
and amplify this signal without signal degradation to whopping three
watts that is delivered to the end of the booster antenna cable.
This booster is the highest power cellular amplifier that is available
on the market for use with GSM and TDMA phones.
No In-Car Kit Required
No Professional Installation Required
Can Be Used In The Car, Home, Office Or Cottage
Compatible With Dual Band and Tri-Mode Cellular Telephones, PDA's and Wireless Aircards
|
The BST850-series Boosters are specifically designed to be used with GSM and TDMA digital dual band and tri-mode phones, wireless cards and PDA's. This booster is bi-directional and amplifies receive and transmit signals for GSM, GPRS with EDGE, TDMA and AMPS analog. It is the most powerful booster on the market for use with GSM/TDMA. This booster is the only booster that is FCC type approved to deliver 3 watts of conducted un-distorted power right through the antenna cable and directly to the antenna. No wired or wireless amplifier comes close to achieving the range and signal clarity of the BST850. This is the cell phone booster kit of choice for oil and gas field professionals in North and South America. |
|
Professional installation is not required when used in hand-held mode as shown above. A variety of external antennas are available.
Note: best performance and range will be achieved when used with a magnetic or thru-hole antenna. Genuine Smooth Talker cellular antennas will produce the best results and increase cellular range the farthest. |
|
An antenna adapter cable to connect to various phones must be ordered separately and optional AC/DC power supply for use in home or office is available.The Booster can be used with cellular wireless phones in hand-held mode as seen in the picture above, it can be used with PDA's and wireless aircards or it can be ordered with an installation-ready power cord and added to a cellular hands-free in car kit. |
|
Size: 8.75 X 3.125 X .875 inches
Weight: 19 ounces
Note: The RF connectors on the booster are proprietary (MCT)and an adapter is required to use this booster with an after-market antenna. A genuine SmoothTalker antenna is recommended with this device for best performance and range. |
To learn more about how boosters, amplifiers, repeaters and wireless cellular base stations, how digital and analog networks operate, and how to improve range of cellular phones, pda's and aircards the following articles are recommended reading:
How cellular works and how to improve range
Differences Between Boosters (Wired Amplifiers) and Repeaters (Wireless Amplifiers)
Single Band vs. Dual Band Boosters |
|
|
|
|
|
3-Watt Repeater Booster Amplifier
BST150 Series for all cellular phones that do not have antenna jacks and use passive antenna connections
|
|
| |
|
|
The
BST150 wireless cell phone repeater is designed to be used with
with phones and hands free kits that do not have an antenna jack
connection on the phone. Some phones, including many popular Nokia
models, can only connect to an external antenna or booster using
passive "ring type" or "holder type" antenna
connectors. The BST150 cellular repeater is wireless RF amplifier
that is not directly connected to an antenna port on the phone.
Even though this device is wireless, it is physically connected
to the cellular phone in similar manner as a booster and the losses
between the cellphone and capacitive coupler (antenna pickup cable)
are limited to a fixed value.The BST150 has extra high gain to compensate
for the signal loss between the cellphone and the antenna pick-up.
This high gain wireless repeater will produce 3 watts of power when
used with a Smoothtalker passive antenna connector cable or smoothtalker
hands free kit and compatible cell phone. This repeater can also
be added to Nokia hands free kits that use passive antenna couplers.
Note: The BST150 wireless repeater is designed for Dual-band phones and not compatible with PCS only phones.
 
No In-Car Kit Required
No Professional Installation Required
Can Be Used In The Car, Home, Office Or Cottage
Compatible With Dual Band and Tri-Mode Cellular Telephones
|
The BST150-series Boosters are specifically to be used with any CDMA, GSM,TDMA or analog dual band and tri-mode phones. This model is the most powerful booster available for use with any cellular phones that do not have antenna jacks and use passive antenna connectors. |
|
Professional installation is not required when used in hand-held mode as shown above. A variety of external antennas are available.
Note: best performance and range will be achieved when used with a magnetic or thru-hole antenna. Genuine Smooth Talker cellular antennas will produce the best results and increase cellular range the farthest. |
|
An antenna adapter cable to connect to various phones must be ordered separately and optional AC/DC power supply for use in home or office is available.The Booster can be used with cellular wireless phones in hand-held mode as seen in the picture above, it can be used with PDA's and wireless aircards or it can be ordered with an installation-ready power cord and added to a cellular hands-free in car kit. |
|
Size: 6.0X3.0X0.75 inches
Weight: 10.5 ounces
Note: The RF connectors on the booster are proprietary (MCT)and an adapter is required to use this booster with an after-market antenna. A genuine SmoothTalker antenna is recommended with this device for best performance and range |
|
|
|
|
|
|
3-Watt Booster Amp
BST300 Series for TDMA phones and Networks
|
|
| |
|
|
The BST300 was the first cellular booster amplifier to receive FCC certification for use with digital cellular telephones. This is the original 3 watt digital cell phone booster kit that was available after the analog phones began to be phased out. The BST300 delivered 3 watts of TDMA and analog power and did so when the cellular providers and handset makers said that it couldn't be done. The BST300 is the most widely used cellular booster amplifier in the world.
No In-Car Kit Required
No Professional Installation Required
Can Be Used In The Car, Home, Office Or Cottage
Compatible With Dual Band and Tri-Mode Cellular Telephones
|
The BST300-series Boosters are specifically to be used with TDMA digital tri-mode phones. This model is the most powerful booster available for use with TDMA cellular phones and networks |
|
Professional installation is not required when used in hand-held mode as shown above. A variety of external antennas are available.
Note: best performance and range will be achieved when used with a magnetic or thru-hole antenna. Genuine Smooth Talker cellular antennas will produce the best results and increase cellular range the farthest. |
|
An antenna adapter cable to connect to various phones must be ordered separately and optional AC/DC power supply for use in home or office is available.The Booster can be used with cellular wireless phones in hand-held mode as seen in the picture above, it can be used with PDA's and wireless aircards or it can be ordered with an installation-ready power cord and added to a cellular hands-free in car kit. |
|
Size: 6.0X3.0X0.75 inches
Weight: 10.5 ounces
Note: The RF connectors on the booster are proprietary (MCT)and an adapter is required to use this booster with an after-market antenna. A genuine SmoothTalker antenna is recommended with this device for best performance and range |
To
learn more about how boosters, amplifiers, repeaters and wireless
cellular base stations, how digital and analog networks operate,
and how to improve range of cellular phones, pda's and aircards
the following articles are recommended reading:
|
|
|
|
|
|
3-Watt Booster Amplifiers
BST801 Series for Motorola iDen Phones and Networks:
Southern Linc, Nextel, Mike
|
|
| |
|
|
BST801 series bi-directional direct connect (not wireless) amplifiers are the only true 3 watt transmit power boosters on the market that can produce 3 watts of measured conducted transmit power when driven by an iDen phone. No other brand available on the market can achieve this.
No In-Car Kit Required
No Professional Installation Required
Can Be Used In The Car, Home, Office Or Cottage
Compatible With iDen Band Cellular Telephones, Two-way Radios, PDA's and Wireless Aircards
|
The BST801 series Boosters can only be used with most iDen (Southern Linc, Nextel and Telus Mike) phones and radios. These phones and the iDen network operate on a different frequency than other cellular phones and networks. |
|
Professional installation is not required when used in hand-held mode as shown above. A variety of external antennas are available.
Note: best performance and range will be achieved when used with a magnetic or thru-hole antenna. Genuine Smooth Talker cellular antennas will produce the best results and increase cellular range the farthest. |
|
An antenna adapter cable to connect to various phones must be ordered separately and optional AC/DC power supply for use in home or office is available.The Booster can be used with cellular wireless phones in hand-held mode as seen in the picture above, it can be used with PDA's and wireless aircards or it can be ordered with an installation-ready power cord and added to a cellular hands-free in car kit. |
|
Size: 8.75 X 3.125 X .875 inches
Weight: 19 ounces
Note: The RF connectors on the booster are proprietary (MCT)and an adapter is required to use this booster with an after-market antenna. A genuine SmoothTalker antenna is recommended with this device for best performance and range. |
To
learn more about how boosters, amplifiers, repeaters and wireless
cellular base stations, how digital and analog networks operate,
and how to improve range of cellular phones, pda's and aircards
the following articles are recommended reading:
|
|
|
|
|
|
2-Watt Booster Amplifiers
BST1900 Series for GSM Single Band PCS Phones and Networks:
T-Mobile, Fido
|
|
| |
|
|
The
BST1900 cell phone signal booster is specifically designed for use
with GSM GPRS only phones that operate in the PCS 1900 Mhz frequency.
This booster is rated to deliver 2-watts of measured power to the
end of the antenna cable directly to the antenna. This is the highest
power level permitted under FCC regulations and the BST1900 delivers
all the power allowed.
No In-Car Kit Required
No Professional Installation Required
Can Be Used In The Car, Home, Office Or Cottage
|
The
BST1900-series Boosters are specifically designed be used with
GSM GPRS 1900 mobile cellphones, wireless cards and PDA devices
(example:T-Mobile). This is a specific use booster and is recommended
for use with GSM1900 only digital mobile phones or in areas
where GSM1900 signal is poor. If you have a dual band GSM phone
with a Dual band service provider (example: Cingular) the BST850
cellular booster is recommended. The BST1900 is the most powerful
GSM1900 booster on the market. |
|
Professional installation is not required when used in hand-held mode as shown above. A variety of external antennas are available.
Note: best performance and range will be achieved when used with a magnetic or thru-hole antenna. Genuine Smooth Talker cellular antennas will produce the best results and increase cellular range the farthest. Antenna choice and use of antennas with ultra low-loss cables is critical because of the very high 1900 Mhz frequency. A poor antenna and antenna cable can nullify the beneficial effect of a booster. |
|
An antenna adapter cable to connect to various phones must be ordered separately and optional AC/DC power supply for use in home or office is available.The Booster can be used with cellular wireless phones in hand-held mode as seen in the picture above, it can be used with PDA's and wireless aircards or it can be ordered with an installation-ready power cord and added to a cellular hands-free in car kit. |
|
Size: 6.0X3.0X0.75 inches
Weight: 10.5 ounces
Note: The RF connectors on the booster are proprietary (MCT)and an adapter is required to use this booster with an after-market antenna. A genuine SmoothTalker antenna is recommended with this device for best performance and range |
|
|
|
|
|
|
2-Watt Boosters
BST1901 Series for PCS/CDMA 1900 MHz Cellphones and Networks:
Sprint, N-Telos, Cricket
|
|
| |
|
|
The
BST1901 cell phone booster is specifically designed for use with
CDMA and EVDO phones that operate in the PCS 1900 Networks. Although
most PCS CDMA network operators offer dual band cellular phones
to their customers, they often charge an extra "roaming"
fee when the phone leaves the home PCS network and for this reason
some users set their phones to operate on the Home PCS network only.
If you are one of these people and you want your PCS coverage to
increase then the BST1901cell phone booster is the booster of choice.
This cell booster is a bi directional amplifier that increases receive
and transmit power and is rated to deliver 2-watts of power which
is the highest power level permitted under FCC regulations.
No In-Car Kit Required
No Professional Installation Required
Can Be Used In The Car, Home, Office Or Cottage
|
The
BST1901-series cellular boosters are specifically designed be
used with PCS handsets, wireless cards and PDA's (example:Sprint).
This are a specific use booster and is recommended for use with
CDMA 1X EVDO PCS phones that are not allowed to "roam"
or in areas where CDMA1900 signal is poor. If you have a dual
band Sprint phone that you allow to "roam" and use
it in remote areas the BST800 cell phone booster is recommended.
This booster is recommended only if you require PCS signal boosted.
The BST1901 is the most powerful CDMA PCS booster on the market.
|
|
Professional installation is not required when used in hand-held mode as shown above. A variety of external antennas are available.
Note: best performance and range will be achieved when used with a magnetic or thru-hole antenna. Genuine Smooth Talker cellular antennas will produce the best results and increase cellular range the farthest. Antenna choice and use of antennas with ultra low-loss cables is critical because of the very high 1900 Mhz frequency. A poor antenna and antenna cable can nullify the beneficial effect of a booster. |
|
An antenna adapter cable to connect to various phones must be ordered separately and optional AC/DC power supply for use in home or office is available.The Booster can be used with cellular wireless phones in hand-held mode as seen in the picture above, it can be used with PDA's and wireless aircards or it can be ordered with an installation-ready power cord and added to a cellular hands-free in car kit. |
|
Size: 6.0X3.0X0.75 inches
Weight: 10.5 ounces
Note: The RF connectors on the booster are proprietary (MCT)and an adapter is required to use this booster with an after-market antenna. A genuine SmoothTalker antenna is recommended with this device for best performance and range |
|
|
